The fuse provides overcurrent protection and safeguards your Hisense TV from circuit damage. Moreover, it acts as a safety device that blows when overloaded. However, a blown fuse will make things difficult, and you can’t turn on your Hisense TV. But no worries! This dedicated guide will help you how to undergo the process of Hisense TV fuse replacement in detail.
Does Hisense TVs Have Fuses?
Yes, every Hisense TV will have a fuse protector inside the circuit board. A fuse will recognize the excessive current supplied to the TV and immediately cut down the supply by melting a piece of wire, thus breaking the circuit. Prominently, this will save the internal components of the Hisense Smart TV.
What Causes a Hisense TV Fuse to Get Blown?
A blown fuse in a Hisense TV is usually caused by various internal and external factors. Some of the most common causes of the issue are,
- Too many devices are connected to the same power outlet, making an overloaded circuit.
- A damaged or short-circuited power cord.
- Damaged internal components inside the TV.
- Using an incorrect fuse type or using a different amperage rating fuse with the TV.
Where to Purchase the TV Fuse?
Basically, a fuse is a common product that can be easily purchased from various sources. Some of the platforms where you can purchase a Hisense TV fuse are as follows.
- Online Retail Stores: Fuse for Hisense TV can be purchased from popular online stores like Amazon, Best Buy, Flipkart, IndiaMART, etc.
- Offline Retail Shops: Visit the nearby local retail in person and purchase the desired fuse for your Hisense TV.
Methods for Hisense TV Fuse Replacement
Follow the steps mentioned below to replace the blown fuse by yourself or get the necessary details to contact the support service for fuse replacement.
1. Replace the Hisense TV Fuse by Yourself
As a primary step, you can replace the Hisense TV fuse by yourself with the necessary basic essentials. Go through the below accessories and then follow the steps to replace your Hisense TV blown fuse.
- Initially, get ready with the necessary tools, including screwdrivers, leather gloves, fuses, and flashlights.
- Turn off the TV switch and unplug your Hisense TV from the power cable.
- Then, use the screwdrivers and dismantle the entire rear panel by removing the screws.
- Now, locate the fuses on the board near the power cord that connects to the TV. Check for damage, black color, or a gap caused by burns.
- If you find any, immediately dismantle the fuse wire and replace the blown fuse with a new fuse that has been bought from Amazon.
- Once done, assemble the dismantled components and then close your TV panel.
- Finally, plug the Hisense TV back into the power cable and turn on the switch. Your Hisense TV fuse replacement process has been successful.
Tip! Sometimes, the fuse is soldered to the TV board. In that case, you need to seek help from a professional or take your TV to a repair shop in person.
2. Contact the Support Team
If you are not familiar with electrical and electronic products, it’s better to seek help from a technician or Hisense support team. Contact the professionals, explain your problem to them, and get a repair remedy to replace the blown fuse. Moreover, you can also visit the authorized centers in person and get a fixed solution.
Otherwise, ask the professionals to come for a home visit and replace the damaged fuse on your TV. Some of the contact ways of Hisense customer service are,
| MODE OF CONTACT | CONTACT LINK |
|---|---|
| Phone Call | +1 (888) 935-8880 |
| Support Website | hisense-usa.com/support |
| Contact Form | hisense-usa.com/contact |
| Customer Centers | global.hisense.com/support/customer-center |
| FAQ Page | hisense-usa.com/support/faq |
| [email protected] |
How to Prevent a Hisense TV Fuse From Blowing
Certain steps or measurements can be taken in advance to prevent your Hisense TV fuse from blowing.
- Check for any damage to the TV’s power cord regularly.
- Do not overload the power outlet in which the TV is plugged in.
- Use a proper surge protector to maintain a standard current supply on the TV.
- Be sure to avoid plugging another high-power appliance into the same power circuit.
End Note!
You can replace the blown fuse on your Hisense Smart TV using either of the above ways. Though the fuse is a cost-efficient component, the real challenge lies in inspecting and replacing it. The above ways will be suitable for any Hisense TV model. Once done, you can access your TV seamlessly without any issues.
FAQ
You can use a multimeter to troubleshoot whether a Hisense TV fuse is blown or not. In some cases, a visual inspection will also give you a hand.
Note the power ratings and the fuse sizes, which have been mentioned in the sticker or in the user manual of your purchased Hisense TV. Otherwise, consult the manufacturer’s website to know the right fuse size for your Hisense TV.
