Even though the best Hisense Soundbar has a greater system and audio quality, it will face minor glitches or connectivity issues. Meanwhile, this guide will help you recover those issues by resetting the Hisense Soundbar. Once you’re done with the process, you can connect your Hisense soundbar to your Hisense TV and enjoy streaming high-quality content without fuss.
How to Soft Reset Hisense Soundbar
A soft reset is a process that restarts a device by closing and clearing the temporary data from RAM. This process doesn’t delete any data or settings on the TV, so it is recommended that you perform this process as your first troubleshooting step.
- Once you turn off your Hisense Soundbar, you need to unplug the power cables from it.
- Disconnect the extra cables from the soundbar and locate the physical buttons.
- To drain out the extra charge, you need to press the Volume Down button on the Hisense Soundbar.
- Hold for 5-10 minutes, and then connect the power cables back to your soundbar.
- That’s it. Your Hisense soundbar is done with a soft reset. Finally, you can turn on your soundbar and use it according to your needs without interruption.
How to Hard Reset Hisense Soundbar
If the soft reset process fails to restore your soundbar, you can try hard resetting it. This will erase all the stored data & customized settings and will bring back the soundbar to its initial state.
Without Using Remote Control
- Hold the [Source] + [Volume -] on the Hisense sound bar’s top panel for 5 seconds to proceed with a factory reset.
- Some Hisense Soundbar models come with the built-in Reset/Standby button. If your soundbar has one, then press the Reset button for 10 seconds straight to reset the device.
Using Remote Control
- Initially, your Hisense Soundbar should be in the Standby Mode.
- Get the Hisense Soundbar’s remote and press the following combinations.
> | < | VOL+ | BASS –
- Once you press these buttons, you will be displayed with the RESET message on your soundbar.
- Finally, your Hisense Soundbar will be on Standby Mode or turned off completely with a successful reset.
Default Value on Hisense Soundbar After a Factory Reset
After factory resetting your Hisense Soundbar, the value turns to default, which is listed in the table below.
| Hisense Soundbar Mode | Default Value |
|---|---|
| Source | Optical |
| Sound | 30 |
| Treble | 0 |
| Bass | 0 |
| Surround | ON |
| Dimmer | MAX |
| EQ | Music |
| Auto Standby | ON |
| Auto Awake | OFF |
Other Troubleshooting Fixes
Besides resetting your device to the initial value, you can also follow the below troubleshooting methods to eradicate the issue related to your Hisense Soundbar.
- Restart your Hisense Soundbar by unplugging the soundbar’s power cable from the power supply and plugging it back.
- Check if your Hisense smart TV is up to date to avoid technical bugs and glitches when connected to your Hisense Soundbar.
- Inspect the HDMI cables connected to your soundbar and TV and make sure they are connected firmly.
- If you’re using a Doly Atmos Hisense Soundbar, be sure to connect it to an HDMI ARC/eARC port on the TV.
Winding Up!
Resetting the Hisense Sondbar will eliminate all the existing bugs and glitches and helps to deliver the sound in high quality. After the reset, you can connect your Hisense Soundbar to your TV or other sources and stream high-quality audio.
FAQ
Yes. Some Hisense Soundbars have a built-in reset button in them. If your soundbar doesn’t have one, then you can use the Hisense Soundbar remote control or the physical button combinations to perform a reset.
If your Hisense Soundbar gets stuck on HDMI ARC mode, you can’t switch to any other source using the remote or physical buttons. In such cases, press the [Source] + [Volume -] buttons simultaneously on the soundbar for 5 seconds. This will reset the soundbar, and you can pair it again and use it hassle-free.
